FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Half Coil Jacket Formula

Fx Copy

LaTeX Copy

Thickness of Half Coil Jacket can be determined by considering the heat transfer coefficient, the surface area of the coil, and the temperature difference. Check FAQs

t coil = \frac{p j \cdot d i}{(2 \cdot f j \cdot J)} + c

t_coil - Thickness of Half Coil Jacket?p_j - Design Jacket Pressure?d_i - Internal Diameter of Half Coil?f_j - Allowable Stress for Jacket Material?J - Joint Efficiency for Shell?c - Corrosion Allowance?

Thickness of Half Coil Jacket Example

With values

With units

Only example

Here is how the Thickness of Half Coil Jacket equation looks like with Values.

Here is how the Thickness of Half Coil Jacket equation looks like with Units.

Here is how the Thickness of Half Coil Jacket equation looks like.

10.5278 = \frac{0.105 \cdot 54}{(2 \cdot 120 \cdot 0.85)} + 10.5

10.5278mm = \frac{0.105N/mm² \cdot 54mm}{(2 \cdot 120N/mm² \cdot 0.85)} + 10.5mm

10.5278 = \frac{0.105 \cdot 54}{(2 \cdot 120 \cdot 0.85)} + 10.5

Tip: Use pencil () icon above to edit Input Values and Units.

Solution

Copy

Share

You are here -

Home » Engineering » Chemical Engineering » Process Equipment Design » Thickness of Half Coil Jacket

Thickness of Half Coil Jacket Solution

Follow our step by step solution on how to calculate Thickness of Half Coil Jacket?

FIRST Step Consider the formula

t coil = \frac{p j \cdot d i}{(2 \cdot f j \cdot J)} + c

Next Step Substitute values of Variables

∴

t coil = \frac{0.105N/mm² \cdot 54mm}{(2 \cdot 120N/mm² \cdot 0.85)} + 10.5mm

Next Step Prepare to Evaluate

∴

t coil = \frac{0.105 \cdot 54}{(2 \cdot 120 \cdot 0.85)} + 10.5

Next Step Evaluate

∴

t coil = 0.0105277941176471m

Next Step Convert to Output's Unit

∴

t coil = 10.5277941176471mm

LAST Step Rounding Answer

∴

t coil = 10.5278mm

Thickness of Half Coil Jacket Formula Elements

Variables

Thickness of Half Coil Jacket

Thickness of Half Coil Jacket can be determined by considering the heat transfer coefficient, the surface area of the coil, and the temperature difference.

Symbol: t_coil

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Design Jacket Pressure

Design Jacket Pressure refers to a type of pressure vessel designed to withstand high pressures and temperatures, typically used for containing gases or liquids under extreme conditions.

Symbol: p_j

Measurement: PressureUnit: N/mm²

Note: Value should be greater than 0.

Internal Diameter of Half Coil

Internal Diameter of Half Coil is a measurement of the distance of a straight line from one point on the inner wall of the object, through its center, to an opposite point also on the inside.

Symbol: d_i

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Allowable Stress for Jacket Material

Allowable Stress for Jacket Material at Design Temperature is defined as the material failure stress divided by a factor of safety greater than one.

Symbol: f_j

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Joint Efficiency for Shell

Joint Efficiency for Shell refers to the effectiveness of the joint between two adjacent sections of a cylindrical shell, such as in a pressure vessel or a storage tank.

Symbol: J

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Corrosion Allowance

Corrosion allowance is defined as an extra thickness normally added to carbon and low alloy steel to mitigate the CO2 corrosion rate.

Symbol: c

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Credits

Creator Image

Created by Heet Vora

Thadomal Shahani Engineering College (Tsec), Mumbai

Heet Vora has created this Formula and 200+ more formulas!

Verifier Image

Verified by Prerana Bakli

University of Hawaiʻi at Mānoa (UH Manoa), Hawaii, USA

Prerana Bakli has verified this Formula and 1600+ more formulas!

Other formulas in Jacketed Reaction Vessel category

Go Required Thickness for Jacket Closer Member with Jacket Width

t rc = 0.886 \cdot w j \cdot \sqrt{\frac{p j}{f j}}

Go Jacket Width

w j = \frac{D ij - OD Vessel}{2}

Go Required Plate Thickness for Dimple Jacket

t j (minimum) = Maximum Pitch \cdot \sqrt{\frac{p j}{3 \cdot f j}}

Go Maximum Hoop Stress in Coil at Junction with Shell

f cc = \frac{p j \cdot d i}{2 \cdot t coil \cdot J coil}

See More

How to Evaluate Thickness of Half Coil Jacket?

Thickness of Half Coil Jacket evaluator uses Thickness of Half Coil Jacket = (Design Jacket Pressure*Internal Diameter of Half Coil)/((2*Allowable Stress for Jacket Material*Joint Efficiency for Shell))+Corrosion Allowance to evaluate the Thickness of Half Coil Jacket, The Thickness of Half Coil Jacket formula is defined as the distance from the external part to the internal part of a Coil. Thickness of Half Coil Jacket is denoted by t_coil symbol.

How to evaluate Thickness of Half Coil Jacket using this online evaluator? To use this online evaluator for Thickness of Half Coil Jacket, enter Design Jacket Pressure (p_j), Internal Diameter of Half Coil (d_i), Allowable Stress for Jacket Material (f_j), Joint Efficiency for Shell (J) & Corrosion Allowance (c) and hit the calculate button.

FAQs on Thickness of Half Coil Jacket

What is the formula to find Thickness of Half Coil Jacket?

The formula of Thickness of Half Coil Jacket is expressed as Thickness of Half Coil Jacket = (Design Jacket Pressure*Internal Diameter of Half Coil)/((2*Allowable Stress for Jacket Material*Joint Efficiency for Shell))+Corrosion Allowance. Here is an example- 10527.79 = (105000*0.054)/((2*120000000*0.85))+0.0105.

How to calculate Thickness of Half Coil Jacket?

With Design Jacket Pressure (p_j), Internal Diameter of Half Coil (d_i), Allowable Stress for Jacket Material (f_j), Joint Efficiency for Shell (J) & Corrosion Allowance (c) we can find Thickness of Half Coil Jacket using the formula - Thickness of Half Coil Jacket = (Design Jacket Pressure*Internal Diameter of Half Coil)/((2*Allowable Stress for Jacket Material*Joint Efficiency for Shell))+Corrosion Allowance.

Can the Thickness of Half Coil Jacket be negative?

No, the Thickness of Half Coil Jacket, measured in Length cannot be negative.

Which unit is used to measure Thickness of Half Coil Jacket?

Thickness of Half Coil Jacket is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Half Coil Jacket can be measured.

Spanish French German Russian Italian Portuguese Polish Dutch

© 2024-2026. Developed & Maintained by softUsvista Inc.

Let Others Know

✖

WhatsApp

Copied!